Off shore and Mooring
Applications
Dynamica Ropes are
very well suited for the Offshore and Mooring applications
because of the low weight and high strength characteristics.
Its speed and easy handling are other important parameter
makes it suitable for Mooring.
We have given a unique
solution for the high tides breakage of ordinary fiber
Mooring Ropes. AP Moller has used the
our unique solution in the ports that are subject to high
tides during the monsoon. They are very much satisfied
with our solution with Dynamica Rope. Earlier when they
were using ordinary Fiber Ropes, with the berthing of one
ship, they use to lose one Mooring rope in the monsoon
time because of the high tides. But now with the application
of our Unique Solution using Dynamica ropes not even a
single rope has broken in the last 2 years, which speaks
for itself.
Towing
The
Dynamica Ropes can be also used to replace the traditional
steel
wire that is used for Towing. They
can be used for coastal towing, salvage, escort towing,
controlled depth towing for pipeline/bundle pulls and
by Anchor Handling vessels. The advantages of using the
towlines from Dyneema® fiber
are as follows:
Although ropes from
Dyneema® fiber have a high abrasion resistance, we advise
to prevent abrasion by either using a polyester overbraiding
or providing rollers on the fairleads. We offer other very effective solutions
to prevent the abrasion while towing , which is unique
and very effective.
Fishing
These Ropes
are preferred in Fishing to be used as Bridles, Gilson’s
Cod lines, Headlines and Selvage Ropes in comparison
to other traditional
ropes.
Vehicle Recovery
The Dynamica ropes
have been highly recommended for use on the vehicle
recovery winches instead
of the traditional steel wire. This is more safe, flexible
and easy to handle in comparison to a steel wire. The
common sizes used are from 8 to 12mm size.
DyneemaŽ is a trademark of Royal DSM
